Innovation in Air Distribution

High Pressure Fill Compressors

Air Systems Provides a full line of high pressure fill compressors with high CO shutdown, air storage, air distribution systems and containment fill stations. We can provide output air pressures to 6000psi and 26cfm capacity.

We specialize in designing custom systems to meet Military, Fire/Rescue and Industrial fill  applications.

Call Air Systems' Customer Service Department to discuss your particular application. A high pressure compressor questionaire is provided as a link above and in our catalog to aid us in designing the system to meet your needs.

Horizontal Fill Compressor

A Complete Fill System Includes:

• High Pressure Fill Compressor with CO Monitor
• Air Storage Cylinders
• Full Containment Fill Station

Electric, Gasoline or Diesel Engines Available

Vertical Fill Compressor

Portable Fill Compressors

CFM outputs available from 3.5 to 10.8cfm, Electric, Gas or Diesel

SCUBA Fill Whips Available

Laboratory Air Testing Service

Certified laboratory air testing is now available for high pressure bottled air or low pressure compressor air requirements. Take your own samples in 10 minutes and send out for precise laboratory results. A 2LA accredited lab will test to any recognized standards, e.g., CGA, NFPA, or Federal MIL Specs. Results can be obtained in less than 3 days or expedited service is available at an extra charge.

AIR SAMPLING KITS AVAILABLE FOR RENTAL OR PURCHASE

The COOL-BOX™
Portable Cooling Air Distribution Manifold

Features

• Provides approximately 50°F output air temperature with input temperatures up to 180°F
• Provides 4 to 8 hours of cooling using 20 lbs. of ice for operation
• Manual condensate drain installed inside.
• Attaches to any Grade-D compressed air source up to 125psi 
• Adjustable pressure regulator, gauge, and safety relief valve installed in the system with a final filter on Model BACB-196
• Entire unit is packaged in a rugged Igloo® roller cooler with a fold down pull handle

Low Pressure
Model BACB-196LP
Maximum Pressure 20psi

Benefits

• Provides low cost cool breathing air anywhere
• Operates with any airline Type-C mask or hood style respirator
• Ideal for cooling Level "A" chemical suits and air supplied hoods
• Provides cool air for up to four workers
• Attaches easily to any Grade-D air source up to 125psi with Model BACB-196. 20psi maximum for Model BACB-196LP, ambient air pump version
• Eliminates the need and expense of noisy vortex cooling tubes
• Designed and engineered for less than 2psi pressure drop in the system with flow capacities to 75cfm
• Provides NIOSH point-of-attachment components and cooling in one package
• Custom Mounting Options Available, Consult Factory

Note: Output temperatures may vary depending on ambient conditions, the type of respirator used, and length of hose.

"JUST ADD ICE FOR IMMEDIATE
RESPIRATOR AIR COOLING"

High Pressure
Model BACB-196
Maximum Pressure 125psi

The Twin-Air™ compressor system has been designed to provide Grade-D breathing air to 3 workers wearing pressure demand respirators. The TA-3 has twin ASME receiver tanks that act as the mounting frame for the compressor. The use of the receiver tanks provides air that has been cooled to within 10 degrees of the ambient temperature. We've added pneumatic tires for ease of mobility in rough terrain and a bottom skid plate for going up or down stairs. This plate becomes the frame for the addition of a reserve air cylinder on the model TA-3EA.   This compressor is not designed for use with constant flow respirators or Vortex cooling tubes. 

Comp-3™ Breathing Air Compressor System

Designed for use with Pressure Demand Respirators Only

TA-3 Compressor Specifications

• Rotary vane air compressor rated for continuous duty
• Pressure range to 110psi output
• 2 HP electric motor, 1750rpm continuous duty - thermally protected
• 115/230 VAC 1-phase, 60Hz, 17.2 amps (Requires 20amp service)
• Low maintenance - 500 hours between oil changes
• 10" pneumatic tires
• 50,000 hour minimum vane life
• Built-in skid plate for stair climbing
• USDA approved food grade oil in compression end
• Automatic pressure unloading - full modulation air control
• Breather Box® Grade-D filtration package required
• Noise level below 70 dbA at 3 feet
• 8 Gallon Twin-Air™ tank assembly, 8.5cf air storage @ 110psi, ASME coded
• 1/2" 5000 series Hansen style coupling on air outlet
• Optional explosion-proof motor (230/3 VAC only), Model TA-3EXP
• Dimensions: 46"L x 24"W x 22"H
• Weight: 150 lbs.

COMP-3EA™ Breathing Air Compressor System

Designed for use with Pressure Demand Respirators Only

The Auto-Air™ Compressor System Package

This compressor system is designed to provide automatic back-up air for up to 3 workers in the event of compressor failure. An optional 60 or 87cf cylinder can be installed on the compressor frame to provide additional egress air.

The package consists of the Auto-Air™ Breather Box® model BB30-COAA, the TA-3EA compressor supplied with a CGA-347 high pressure reducing regulator, primary and secondary hoses.  NIOSH requires the use of a 5 minute airline escape respirator when working in IDLH environments. Our Auto-Air™ feature does not replace the NIOSH requirement, however, some work environments may require longer than a 5 minute airline hip bottle to safely egress the hazardous area. This compressor is not designed for use with constant flow respirators or Vortex cooling tubes.

Explosion-Proof Auto-Air™ Compressor

Designed for use with Pressure Demand Respirators Only

Specifications:

• 110psi output air pressure, 3 couplings supplied
• Explosion-proof electric motor - 230 VAC, 3 phase
• Explosion-proof on/off switch
• 25ft. power cord, no plug, user wired per NEC requirements 
• 3-worker operation - pressure demand respirators only
• Full automatic back-up air feature, up to 4500psi capability
• Pneumatic visual indicator and audible alarm for system failure
• Grade-D, 3 stage filtration with 48cfm flow capacity
• Intrinsically Safe carbon monoxide monitor, CSA approved for 9-volt DC operation in Class 1, Division 1, Groups C and D environments
• Twin-Air™ tank design for cool breathing air output, ASME coded
• Holds one SCBA cylinder up to 4500psi back-up air
• Steel air control panel with high pressure regulator
• Pneumatic 10" tires

This compressor is not designed for use with constant flow respirators or Vortex cooling tubes.

Grade-D, 3-stage Filtration with CSA Approved
Intrinsically Safe Carbon Monoxide Monitor

TA3-AXAF